This (or something like it) happens to me on one of my D510 boxes about every third time I do a warm restart. If the Asterisk config change is minor, you can just do "rpt reload" or "reload" and your changes take effect without risk. If my site was remote, I would add an external watchdog/reboot hardware device but lacking that, I would be inclined to do "reboot" command rather than restart. Clearly this behavior is not a good thing - but it's not unique to asterisk: a Google search on the error message produces 345 results. This is a pretty low-level error from the looks of it - the kernel of the OS talking to the USB driver or something like that. Still, one wonders if some sort of master reset command could be sent to flush things out / reinitialize and avoid the setting up the problem altogether. Ken From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Monty Sent: Thursday, December 22, 2011 2:00 PM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] urb0 Was this ever resolved? I am getting the same error on my Intel D510 board running acid. I get it after it has been running awhile and I make change and do the astres.sh. Have to make a trip up to the site to hit the almighty reset button. Monty On Fri, Oct 22, 2010 at 8:36 AM, Jim Duuuude <telesistant@hotmail.com> wrote: Well, that's what you get for naming your driver so close to something that dumasses like me will confuse for it something else! :-) Honestly, in all the work ive done with USB under Linux, Ive never even heard of the urb thing. The only thing Ive heard of in the realm is your channel driver, and obviously that's what I thought it was. Does that mean that there is something in between the 'urb' and the 'urd' called an 'urc' ???? :-) You know I always believe in 'go big or go home' and that includes when I make a total fool of myself in front of the whole world. Oh well.. JIM WB6NIL
Date: Fri, 22 Oct 2010 11:28:51 -0400 Subject: Re: [App_rpt-users] urb0 From: w9sh@xelatec.com To: telesistant@hotmail.com CC: holldrl@gt.rr.com; app_rpt-users@qrvc.com
Duuuude,
I think you mean that chan_urd is in the XIPAR distro. If he's using XIPAR then of course I'm glad to help.
An "urb" message indicates a USB kernel/hardware problem.
73, Steve, W9SH
You should probably address that question to Steve, W9SH, since the urb channel driver is uniquely part of his distribution.
JIM WB6NIL
From: holldrl@gt.rr.com To: app_rpt-users@qrvc.com Date: Fri, 22 Oct 2010 07:34:47 -0500 Subject: [App_rpt-users] urb0
On linux console keep getting " cannot submit datapipe for urb0, error-22 internal error. What could be causing this? Darril/WD5GJP
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users