I use this when ACID will not load, usually due to issues with BIOS and network drivers. I was assuming you were not able to get ACID to load on you computer. If your running phase2.sh was a second attempt after trying to load ACID, you may need to check that all the files are there because the load deletes some files. In short, if this occurred during an attempt to load the ACID download, I'd just try it again. Thanks, Bob kk6ecm Sent from iPad
On Sep 9, 2014, at 8:27 AM, pete M <petem001@hotmail.com> wrote:
Ok will try that..
thanks!
From: Bob Sent: Tuesday, September 09, 2014 10:55 AM To: 'APP RPT' Subject: Re: [App_rpt-users] Centos 5 with kernel 2.6.32-042stab093.4
I’ve done this several times without issue. Here are the steps I used.
Load CentOS 5.10 downloaded from CentOS website No features, tools only, no desktop (competes with Asterisk) Set ssh /etc/ssh/sshd_config Run "setup" at comand line and disable firewall vi /etc/rc.d/acidrepo http://dl.allstarlink.org Execute portion of ks.cfg, each line at a time cp /etc/rc.d/rc.local /etc/rc.d/rc.local.orig cat <<EOF >>/etc/rc.d/rc.local
cd /etc/rc.d; rm -f phase1.sh; wget -q http://dl.allstarlink.org/installcd/phase1.sh
chmod 755 /etc/rc.d/phase1.sh
/etc/rc.d/phase1.sh Auto reboot after phase1.sh executed phase2.sh runs automatically to completion
Bob kk6ecm
From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of pete M Sent: Tuesday, September 09, 2014 7:00 AM To: APP RPT Subject: [App_rpt-users] Centos 5 with kernel 2.6.32-042stab093.4
Need help to install an allstarlink node that wont have any radio on it in a data center to be my central reflector for my french network of repeater around Quebec Canada..
I did try to run phase2.sh from /etc/rc.d/ but this fail when compiling.
here is the out put from the script
sh phase2.sh ****** Phase 2 post install ****** Getting asterisk install script from http://dl.allstarlink.org../. Getting files.tar.gz from http://dl.allstarlink.org../. ****** Asterisk Installation ****** /etc/rc.d/astinstall.sh: line 11: ntpdate: command not found Unpacking files.tar.gz... Compiling Zaptel... checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking how to run the C preprocessor... gcc -E checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking for GNU make... make checking for grep... /bin/grep checking for sh... /bin/sh checking for ln... /bin/ln checking for wget... /usr/bin/wget checking for grep that handles long lines and -e... (cached) /bin/grep checking for egrep... /bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for initscr in -lcurses... no checking for initscr in -lncurses... no checking for newtBell in -lnewt... no checking for usb_init in -lusb... no configure: creating ./config.status config.status: creating build_tools/menuselect-deps config.status: creating makeopts config.status: creating build_tools/make_firmware_object configure: *** Zaptel build successfully configured *** make[1]: Entering directory `/usr/src/astsrc/zaptel/menuselect' checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for GNU make... make checking for asprintf... yes checking for getloadavg... yes checking for setenv... yes checking for strcasestr... yes checking for strndup... yes checking for strnlen... yes checking for strsep... yes checking for strtoq... yes checking for unsetenv... yes checking for vasprintf... yes checking how to run the C preprocessor... gcc -E checking for egrep... grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for initscr in -lcurses... no checking for initscr in -lncurses... no checking for pkg-config... No configure: creating ./config.status config.status: creating makeopts config.status: creating autoconfig.h configure: configuring in mxml configure: running /bin/sh './configure' --prefix=/usr/local 'CC=' 'LD=' 'AR=' 'CFLAGS=' --cache-file=/dev/null --srcdir=. checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for g++... no checking for c++... no checking for gpp... no checking for aCC... no checking for CC... no checking for cxx... no checking for cc++... no checking for cl... no checking for FCC... no checking for KCC... no checking for RCC... no checking for xlC_r... no checking for xlC... no checking whether we are using the GNU C++ compiler... no checking whether g++ accepts -g... no checking for a BSD-compatible install... /usr/bin/install -c checking for ranlib... ranlib checking for ar... /usr/bin/ar checking for cp... /bin/cp checking for ln... /bin/ln checking for mkdir... /bin/mkdir checking for nroff... /usr/bin/nroff checking for rm... /bin/rm checking for strdup... yes checking for vsnprintf... yes configure: creating ./config.status config.status: creating Makefile config.status: creating mxml.list config.status: creating mxml.pc config.status: creating config.h configure: Menuselect build configuration successfully completed make[1]: Leaving directory `/usr/src/astsrc/zaptel/menuselect' make[1]: Entering directory `/usr/src/astsrc/zaptel/menuselect' make[2]: Entering directory `/usr/src/astsrc/zaptel/menuselect' gcc -g -c -D_GNU_SOURCE -Wall -c -o menuselect.o menuselect.c gcc -g -c -D_GNU_SOURCE -Wall -c -o strcompat.o strcompat.c gcc -g -c -D_GNU_SOURCE -Wall -c -o menuselect_stub.o menuselect_stub.c make[3]: Entering directory `/usr/src/astsrc/zaptel/menuselect/mxml' gcc -O -Wall -c mxml-attr.c gcc -O -Wall -c mxml-entity.c gcc -O -Wall -c mxml-file.c gcc -O -Wall -c mxml-index.c gcc -O -Wall -c mxml-node.c gcc -O -Wall -c mxml-search.c gcc -O -Wall -c mxml-set.c gcc -O -Wall -c mxml-private.c gcc -O -Wall -c mxml-string.c /bin/rm -f libmxml.a /usr/bin/ar crvs libmxml.a mxml-attr.o mxml-entity.o mxml-file.o mxml-index.o mxml-node.o mxml-search.o mxml-set.o mxml-private.o mxml-string.o a - mxml-attr.o a - mxml-entity.o a - mxml-file.o a - mxml-index.o a - mxml-node.o a - mxml-search.o a - mxml-set.o a - mxml-private.o a - mxml-string.o ranlib libmxml.a make[3]: Leaving directory `/usr/src/astsrc/zaptel/menuselect/mxml' gcc -o menuselect menuselect.o strcompat.o menuselect_stub.o mxml/libmxml.a mxml/libmxml.a make[2]: Leaving directory `/usr/src/astsrc/zaptel/menuselect' make[1]: Leaving directory `/usr/src/astsrc/zaptel/menuselect' Generating input for menuselect ...
*********************************************************** The existing menuselect.makeopts file did not specify that 'zttool' should not be included. However, either some dependencies for this module were not found or a conflict exists.
Either run 'make menuselect' or remove the existing menuselect.makeopts file to resolve this issue. ***********************************************************
make: *** [menuselect.makeopts] Error 255 Failure: Unable to compile Zaptel 2 Fatal error: Unable to install Asterisk! [root@node rc.d]#
I dont know where to go from there..
Anyone care to help a bit?
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.