what not a single answer... wow.. From: petem001@hotmail.com To: app_rpt-users@ohnosec.org Date: Thu, 26 Mar 2015 12:54:46 -0400 Subject: [App_rpt-users] signal level good enough for a URI-X? Anyone can confirm if a signal level of 70~90mVrms with an Output impedance: 1kΩ or less Coupling: AC coupling Frequency response: ±2.5dB at 10~3000Hz is enough to drive a URI or should I use the included pre amp in the URI-X? trying to use the RD line from a tkr-750 to do USBRadio control of a node. thanks And while I am at it, pin 10 and 11 of the tkr both are signal input, 10 is TD (tx data) and 11 is TA (tx audio) If I feed one side of the output to the pin 10 (TD) for tone signal and the other side to (TA) and apply repeated audio would that make sens? Cause I did try that and It did not seem to work.. thanks again for your input Pierre VE2PF _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.