For those of you who are into this sort of thing, DIAL 8.5 has been installed, conbooberated and running successfully with no apparent lag, on the latest stable version of Proxmox. Currently, it is a radio-less node. The test environment is a cluster of three Dell R310 servers (nodes), each with 16GB+ RAM, RAID 1 system drives, some other volume drives, 10GB fiber storage network links, and 1GB network connections. Each of three nodes have other VMs running on them, running stuff like BIONIC, and other silly things for 'stress' testing, as the system is being evaluated for production environment. To my understanding, proxmox is not a load-sharing/proxy/cloud computing network, each VM is hosted/homed on a single node, but has "live" versions on the other nodes in the cluster. Should a node suffer both power supply failures, or CPU fan squeals to a stop, or the RAID controller dies, within a minute or so, another node will spin up the live versions of the VMs that were on the now dead node. So far, that has not been any noticeable lag, jitters, delay, otherwise anything negative, much to my surprise. This is a 101 for me on VM stuff, never messed with it until now. If anyone wants to assist in testing, you are invited to connect to 29567 Tuesday night, 7PM Central/8PM Eastern for our weekly Allstar Technical Net. I am calling the net tomorrow night, to which the topics are advanced ASL node configurations, and some other stuff I have to be reminded of. There is chatter throughout the days, more-so at night, so anyone is welcome to connect anytime! Don't be a square, connect to there! ~Benjamin, KB9LFZ