If you define the two in their respective rpt.conf nodes stanza, and have a function codes assigned to ilink,3 and ilink ,1 the private node should be able to connect directly. Something like this.... In the public node [nodes] radio@127.0.0.1:4569/29728,NONE. ; the public node radio@XXX.XXX.XXX.xxx:4569/1701,NONE. ; the private node Where XXX.XXX.XXX.XXX is the address of the private node, and1701 is it's number. On the private node: [nodes] radio@127.0.0.1:4569/1701,NONE radio@yyy.yyy.yyy.yyy:4569/29728,NONE Where yyy.yyy.yyy.yyy is the address of the public node. In fact, I think you'll need to do this anyhow since the private node won't appear or get directory information from the Allstar portal. Once that's in place, just a matter of dialing *329728 at the private node. If you wanted to make it shorter dialing.... Define two macros: [macro] 60 = *129728. ; disconnect 61 = *329728. ; connect The user can dial (and easily remember) *561 to connect, and *560 to disconnect Robert Garcia <robert@n5qm.com> wrote:
All,
Is it possible to pass a variable via DTMF to a macro? Let me explain my goal..
Private Node <-> Public Hub
I would like a user on the private node to be able to link or unlink the hub node without having to go through the *4 remote command process to do it.
In practice, I would like to use a macro like *5329728 from the Private Node and have the Public Hub connect to node 29728, is this possible?
Robert N5QM _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-- Sent from my Android phone with K-9 Mail. Please excuse my brevity.