Yeah, that's what I kept seeing, I was hoping there was a way around that. I am guessing this can be dealt with in the code but I don't really have that ability, external Deemphasis it is then. On Tue, Jul 11, 2017 at 3:42 PM, Sam Skolfield <kj6qfs@gmail.com> wrote:
Hey Joe, If you don't specify a PL tone in the voter.conf, the RTCM stops preemphasizing. If you need the PL generation, you're stuck.
Hope all is well.
On Tue, Jul 11, 2017 at 10:26 AM Joe Moskalski <kc2irv@gmail.com> wrote:
I wanted to pose this question in case anyone knows how to do this or not or if its even possible. I currently have a need in a new simulcast system to not have the audio that comes out of the RTCM preemphed. I have done some digging and so far I have not uncovered a solution other than an external deemphasis circuit on the output.
Thanks, Joe - KC2IRV _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- KJ6QFS Sam Skolfield
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.