The functions in rpt.conf are touch tone pointers to the underlying command structure of app_rpt. For example 3 = ilink,3 in the functions stanza of rpt.conf means that when the touch tone function *3 is received the app_rpt command ilink 3 is executed, which, of course is the connect command. This gives app_rpt unmatched flexibility. You could change what *3 does, although that would be ill advised. A better example would be ilink 6 which disconnects all nodes. You might prefer to use *86 rather than the current DIAL function *806 to disconnect all nodes. So in rpt.conf you would change 806 = ilink,6 to 86 = link,6. DIAL has darn near all the app_rpt commands available mapped to touch tone functions. The complete list of all app_rpt commands is documented in the comments at the top of app_rpt.c available at https://github.com/AllStarLink/Asterisk/blob/master/asterisk/apps/app_rpt.c On Fri, Jan 5, 2018 at 6:19 AM, Steve Zingman <szingman@msgstor.com> wrote:
The sample rpt.conf that is included with AllStarLink Asterisk is my attempt to include each command available. For the numbering system, except for a few commands, there is no standard. That is up to the node operator. The sample rpt.conf is at <https://github.com/AllStarLin k/DIAL/blob/master/configs/rpt.conf> I'm sure I missed something. I would not be surprised if there are errors. As people point them out I'll make edits. We are working to fill out the wiki as the place to go for all things AllStarLink at <http://wiki.allstarlink.org/wiki/Main_Page>
73, Steve N4IRS
On 1/5/2018 3:31 AM, larry wrote:
Can some one point me to a listing of every available command defined that can used with Allstar.
I am have a heck of a time trying to configure my nodes so everything is all the same commands on all my nodes.. It seems whenever there is a different version other than the 1-5 ilink commands there is no standard numbering system between versions or platforms. Realizing that it is up to me to standardize my own system I am about to start from scratch eliminating all the jumble. It would certainly be helpful if there was a COMPLETE command list with explanations of their functions.
Larry - N7FM _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP