Yes! Here's the applicable settings from the rpt.conf node stanza: [your node number] rxchannel = Simpleusb/usb ; Rx audio/signalling channel remote = xcat civaddr = 32 functions = functions-remote ;lconn = PP3=1 ;ldisc = PP3=0 memory = memory ; Section to hold memory entries (optional) ; remote=ft897 for Yaesu FT-897 or ; remote=rbi for Doug Hall RBI1 ; remote=kenwood for Kenwood mobiles such as the TMG707A ; remote=ic706 for the Icom IC-706 ioport = /dev/ttyS0 ; Specify port for serial port (optional) iospeed = 19200 dusbabek = yes ; either you need it or you don't ;iobase = 0x378 ; Specify IO port for parallel port (optional) authlevel = 2 ; Remote base authentication level ;; authlevel = 0 : Anyone can use it ;; authlevel = 1 : Requires log in, Waits for Tx key to ask for it ;; authlevel = 2 : Requires log in, asks for it automously ;mars = 0 ; set=1 for IC-706 w/MARS mods (optional) remote_inact_timeout=0 ; Inactivity timer for remote base nodes only (set to 0 to disable). remote_timeout=5400 ; Session time out for remote base. (set to 0 to disable) -- Tim :wq On Oct 28, 2011, at 2:23 PM, Monty wrote:
Hello Everyone, I am wondering if anyone on the list has successfully integrated a Syntor X with an Xcat to app_rpt? I have 2m and a 10m/6m flavor. Would the 10m/6m have trouble?
Monty _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users