It seems to me the Morse stanza only establishes the following in app_rpt.conf: ;[morse] ;speed=20 ; Approximate speed in WPM ;frequency=800 ; Morse Telemetry Frequency ;amplitude=4096 ; Morse Telemetry Amplitude ;idfrequency=330 ; Morse ID Frequency ;idamplitude=2048 ; Morse ID Amplitude The string is established by: idrecording = |iW6XYZ and idtalkover=|iW6XYZ (Which seems to me is established for each node separately) Where ; Telemetry entries are shared across all repeaters ; Can be a tone sequence, morse string, or a file ; ; |t - Tone escape sequence ; ; Tone sequences consist of 1 or more 4-tuple entries (freq1, freq2, duration, amplitude) ; Single frequencies are created by setting freq1 or freq2 to zero. ; ; |m - Morse escape sequence ; ; Sends Morse code at the telemetry amplitude and telemetry frequency as defined in the ; [morse] section. ; ; Follow with an alphanumeric string ; ; |i - Morse ID escape sequence ; ; Sends Morse code at the ID amplitude and ID frequency as defined in the If you are not using the |m for telemetry, or don't care, you could use it with a different frequency and amplitude in the [morse] section as idrecording = |mW6XYZ ; second node. Just a thought, Bob kk6ecm -----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Geoff Sent: Tuesday, January 21, 2014 4:21 PM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] rpt.conf On 01/22/2014 09:32 AM, Tim Sawyer wrote:
After you make changes to rpt.conf, are you restarting asterisk with "service asterisk restart" or "rpt reload"? --
Hi, Tim - well, I did it a couple of different ways... /etc/init.d/asterisk stop then /etc/init.d/asterisk restart Of course, shutting down asterisk failed (it was already stopped) but restarting was just fine. When that didn't change anything, I thought "well, they're probably doing something funky with the scripting". So, ~#>astdn.sh and ~#>astup.sh were used. The issue remained. Bob said (and this seems to hold true with what a friend said he thinks he remembers on the subject) that the example of rpt.conf says that the morse stanza would be the same for all nodes. With that explanation, it would make sense to still define different morse stanzas, for different callsigns, but that the telemetry and CW ID frequencies would be the same throughout all nodes. Only the CW strings would change. This is the case in my situation. -Geoff _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.