Looks like you will want to connect to RX audio to 3 TX audio to Pin 4 and ptt to 5. Connect ground (earth) to pins 8 and 9. Then you can set up your node for Flat audio in and Composite TX audio out for direct connection to modulator. (TX prelim=yes) Jon VA3RQ On 10/5/2013 9:51 AM, keith wrote:
Good afternoon from the UK,
Has anyone installed an Icom F510 or F610 as a node radio? I managed to locate a 9 pin APC-617 aux connection and the following detail from Icom.
Any help would be great Port definition as detailed. I have built the CM108 USB key fob and at present use a Motorola GM 380 PMR this works great but its nice to have a spare radio.
Kind Regards
Keith Handscombe G7DNT
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
