or...assign a couple DTMF functions in rpt.conf, for instance: 85 = cmd,/etc/asterisk/scripts/enable.sh 86 = cmd,/etc/asterisk/scripts/disable.sh where, in a /scripts directory under /etc/asterisk, there are two scripts as above... enable.sh: #!/bin/bash /usr/sbin/asterisk -rx "rpt cmd nodenumber cop 2 nodenumber" disable.sh (replace the 2 with a 3) chmod 755 [enable.sh, disable.sh] rasterisk rpt reload lots of ways to skin the cat. Remember, not only is asterisk/allstar functionally rich...but you can also use the underlying OS to do many wonderful and various things both to itself as well as the application. There are no limits to the creativity... On 5/26/2017 12:43 PM, Steve Zingman wrote:
As you said, it was when DIAL first released for the RPi so it's 1.0 From the asterisk CLI: rpt cmd 1999 cop 2 1999 <------------ system enable rpt cmd 1999 cop 3 1999 <------------ system disable