I am trying to get a new install of Dial running on Node 41879. I believe I might have created my own problem during startup. I failed to enter the node security number correctly when asked. I assumed it would not register or try until after I had a chance to correct the password in iax.conf once I could log in and proceeded with the setup. Interruptions stopped my process before I could get the node totally setup at that time. The node was left running and on the Internet for a time. I don't know if it was trying to register with the wrong password and has been locked out or what. I see there is a file "savenode.conf" with node and password information in it. it includes a comment statement "# config file for /usr/local/bin/savenode" The savenode file it mentions does not exist. I have no knowledge if the savenode.conf provide it's content to some other places or if the mentioned file being missing matters?? Reason for asking at all is when I entered the wrong password originally the bad data was stored in the savenode.conf file as well as entered in the registration statement in iax.conf I have tried using both DHCP and Static at Allstar to make certain networking was correct. I changed ports at both locations thinking that might help. I verified that the node number and password currently match the data showing on allstar.org. I have also made certain the registration statement in iax.conf is accurate. I am able to ping the registration server from the node but cannot register with allstar.org. Using "iax2 show registration" it returns Host 0.0.0.0:4569 and returns State as unregistered. Node works fine if I connect to off Allstar nodes it just won't register at Allstar. Suggestions? or dump it and start over? Larry - N7FM