The best thing to do is to look at (architecture-wise) the second receive site as if it were a normal repeater (just missing the transmitter). The controller (computer running the Allstar node) doesnt know the difference (it just *assumes* that you have the tx audio and PTT hooked- up to a transmitter,so dont tell it otherwise ;-) ). So, you can cause the two systems (or any 2 Allstar nodes, for that matter) to be "perma- linked" by having one of the nodes have a startup_macro that invokes a DTMF command to perma-link (ilink 13) it to the other node. They will stay linked as long as there is Internet connectivity between them, and if its lost, will re-establish the connection once its restored (no matter how long that might be). JIM WB6NIL From: rpt2@chuck.midlandsnetworking.com Date: Sun, 24 Oct 2010 01:12:00 -0500 To: app_rpt-users@qrvc.com Subject: [App_rpt-users] Need help, linking split site repeater over IP I have a split site repeater, currently 2 receive sites and one transmit site. I would like to place a computer at each site and use these to permanently link the sites. Could someone here please help me get started with a link from one receive site to the transmit site. I will save the second receive site till sometime in the distant future. It seems like this can work but so far I have not been able to find anything that tells how to do it. Is there a how-to somewhere for this type of thing? Chuck Henderson, WB9UUS _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users