Perhaps you have a bad USB FOB. Did you try another? Are you sure the sudio is not being interrupted outside of the FOB? Can you switch the channels physically outside the FOB? 73 Doug WA3DSP http://www.crompton.com/hamradio
From: mark@tinney.us To: app_rpt-users@ohnosec.org Date: Sat, 15 Nov 2014 09:30:12 -0500 Subject: Re: [App_rpt-users] App_rpt-users Channel A audio lost
I am not sure if this is how I get help but here is my question:
I have a BBB running and everything works fine until I eventually start getting a carrier only on channel A audio output, I have audio on channel B when A is not working as I have channel B setup as a monitor in the repeater building. Do you have any suggestions for me to try to figure out this problem?
Thanks, Mark W4GVX
-----Original Message----- From: app_rpt-users-request@ohnosec.org Sent: Friday, November 14, 2014 12:00 PM To: app_rpt-users@ohnosec.org Subject: App_rpt-users Digest, Vol 69, Issue 26
Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org
You can reach the person managing the list at app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. Re: Echolink_and_app_rpt:_Looking_for_m ore_information_on_permit=*-* (ea8ee) 2. Re: Echolink_and_app_rpt:_Looking_for_m ore_information_on_permit=*-* (Stephen Curtis)
----------------------------------------------------------------------
Message: 1 Date: Fri, 14 Nov 2014 09:41:18 +0000 From: ea8ee <ea8ee1@gmail.com> To: Robert Newberry <N1XBM@amsat.org> Cc: app_rpt mailing list <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Echolink_and_app_rpt:_Looking_for_m ore_information_on_permit=*-* Message-ID: <CADJ3RdTVXYNbJpZi3SzJe6s3PkQ3oVct=j9uUu3Ba+Si9cOHww@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1"
how active the vox mode in zoiper? maybe with a dmtf numbers?
2014-11-12 19:14 GMT+00:00 Robert Newberry <N1XBM@amsat.org>:
I think this has come up before, but if you have a spare PC you can create a account on your box for zoiper set it for vox. Then get zello for PC and create a account for you node. Then create a channel for your node. Place the account into the repeater channel. Use virtual audio cables and point zello to zoiper and cross the cables. Works slicker than sh*t! Obviously your zoiper connection is left up full time. Also I password protect my channel.
Feel free to connect to my node and I'll give you a demo.
We have a regular user who is over the road trucker and zello plays nice with his blue parrot headset also much more "PTT radio like" friendly. Also I can record repeater activity too!
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.