Updates are getting here OK... *CLI> head /var/lib/asterisk/rpt_extnodes ; Originally Generated at Sun Aug 31 09:30:03 PDT 2014 ; Generated at Sun Aug 31 12:30:52 EDT 2014 [extnodes] 2000=radio@67.215.233.178:4569/2000,67.215.233.178 2001=radio@96.36.57.202:4569/2001,96.36.57.202 2002=radio@96.36.57.202:4569/2002,96.36.57.202 [root@HB-Hub ~]# cat headRpt_extnodes.sh -- Tim :wq On Aug 31, 2014, at 9:03 AM, Lu Vencl <vencl@att.net> wrote:
Ok, so here is the latest. I discovered that the port # (which I did change earlier) is not updating on the rpt_extnodes file. It still shows 14569. On the local node 27976, it does show the correct node port # as registered in the rpt_extnodes file, so I went ant took another one my nodes and try to see what it shows and it also shows the wrong port #. So I think there is something going on with the allstar server. Unless I am missing something here, I think this might require Jim or an admin to take a look? Or does this only update every few hours now? I thought it was like every 15 minutes or so? But I would have thought that upon registration, the file on the allstar server would update immediately and then all the nodes would grab the file every 15-30 minutes or so.. If someone could confirm. Thanks
27976=radio@63.231.96.56:14569/27976,63.231.96.56
Should be: 27976=radio@63.231.96.56:4569/27976,63.231.96.56
On the affected now, 27976: asterisk -rx 'iax2 show registry'; ll /var/lib/asterisk Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 27976 63.231.96.56:4569 60 Registered Lu KA4EPS _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.