Chris, Your message went into the wrong folder on my e-mail. Sorry for the delay. Lets start by NOT auto starting asterisk add to /etc/init.d/asterisk: exit 0 after: DAEMON=/usr/sbin/asterisk TRUE=/bin/true So, it should read: DAEMON=/usr/sbin/asterisk TRUE=/bin/true exit 0 reboot and lets see the output of asterisk -vvvcd 73, Steve N4IRS On 9/21/2016 9:59 PM, C B wrote:
Hi
Testing a newly built Dial allstarlink server / nodes.
The server is a HP DC5800 1 gig ram and 4 URI’s.
The URI’s where done one at a time, downloading from the allstar web configuration.
Sometimes it starts and sometimes it does not, sometimes it stays running after I type asterisk at the # prompt.
The log below is some of the output after typing asterisk at the # prompt then quickly asterisk –rvvvvvvvvvvvvvvvvvvvvvv
A similar problem that was experienced was due to ACPI.
ACPI was disabled in the BIOS
GRUB_CMDLINE_LINUX_DEFAULT="quiet" was changed to GRUB_CMDLINE_LINUX_DEFAULT="quiet acpi=off"
However the server would not boot that way.
Any help greatly appreciated.
Chris
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Just say no to world domination"