I thought I should answer my own question here. I've done some Google research on using SIP devices behind a NAT router and found some specific info on the SPA-2000. Long story short, a firmware upgrade and some tweaks to some settings in the SPA-2000... it seems to work very nicely now. Fantastic fun indeed! Michael. VK5ZEA On 25/07/2011 20:59, Michael Carey wrote:
Hi Everybody,
I have been playing around some more with my new AllStar node today. I dug an old Sipura SPA-2000 out of the junk box and set it up to connect to the SIP Telephone Portal. This device is connecting to the internet through a separate ADSL connection to my AllStar node.
After resetting the SPA-2000 to default and programming it accordingly... it seems to work... but only once!
When it is first powered up I can connect it to my node (27871), enter my PIN and talk to my node OK.
After this initial call is complete, I cannot seem to re-connect. I dial the node number and #... and then after around 15-20 seconds I get a busy signal. If I remove and replace power on the SPA-2000, it works perfectly once more... but only once.
Any ideas?
Michael. VK5ZEA
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users