You should have *91 function that should turn it off. I load this function into macros beginning with *5 when I connect to large systems such as the Winsystem to keep from listening to the node telemetry when they are connecting and disconnecting. I use another macro to reset my node, disconnect links, and turn the telemetry back on when I am finished. 73, Eric 4Z5UG / WA6IGR Allstar Node: 28422 4Z5UG@guth.us<mailto:4Z5UG@guth.us> Israel Direct: 077-950-9451 USA Direct: +1-720-377-3840 From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Chris Andrist Sent: Thursday, February 07, 2013 5:58 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Telemetry Does anybody know if there is a way to permanently turn off all non-local telemetry. For example: If I connect to another allstar node or another allstar node connects directly to me it should announce. Ir the same with echolink, but the telemetry from remote nodes is getting rather irritating. I know I can set telemdefault=0 and turn off all telemetry, but I want local telemetry. Regards, Chris, KC7WSU AllStar 29205-29214