Thanks for all the replies. Got it working now. Sent from my iPhone
On Oct 31, 2013, at 7:07 PM, Ken <ke2n@cs.com> wrote:
http://ohnosec.org/drupal/node/56
“From an app_rpt/Allstar node, Echolink connections look just like Allstar/App_rpt connections except the Echolink node numbers have been prefixed with a 3 and padded out to 7 digits with leading zeroes. For instance, if you want to connect to Echolink node 1234 on your app_rpt system you would dial *3 followed by 3001234. If you have a 6 digit Echolink node number 123456, you would dial *3 followed by 3123456.”
73 Ken
From: Jake Litwin [mailto:w9jsl@icloud.com] Sent: Thursday, October 31, 2013 11:52 AM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Beginner Help - Echolink and Allstar
I am a beginner to allstar. I have just setup echolink on my Allstar node hub. It is showing up on echolink.org. Two things I need help with...
How do you make a call out to a echolink node from the Allstar node? Trying the standard dtmf prefix plus the echolink node did not work.
I used the echolink app on my iphone to test. It says Welcome To All Star Node 28980, Echolink Node W9JSL-L, so it looks like it is connecting properly. The problem is that on the app its in receive mode and no option to transmit. Is there something in echolink.conf that needs to be configured to allow the echo iphone app to transmit?