Hi Steve, Okay, I reconfigured both remote bases as standard nodes--I just copied the context used for my repeater node and set duplex=0. This works properly with VOX mode, manual keying/unkeying, etc., just like with the repeater node....No issues. And, okay about the link status--I just thought the segfault was interesting. So, other than loss of frequency agility, can you think of any other "show stoppers" that I might hit by retiring remote base mode entirely and just using standard mode for everything?? 73, David KB4FXC On Thu, 9 Oct 2008 hwstar@rodgers.sdcoxmail.com wrote:
See below
Steve WA6ZFT
<* snip *>
First off: Link status doesn't make sense on a remote base! Remote bases are for exclusive use by one user at a time!
Key-unkey flakiness. Two things to check:
1. What happens when you configure the HF and VHF radios as a standard node (with duplex=0)? The remote base code is separate from the standard node code, and there could be a keying bug could be in the remote base code.
2. Please confirm the phone key/unkey is not flakey on your standard node.This key/unkey issue could be a SIP configuration issue.