How you checked out this page. http://ohnosec.org/drupal/node/32 David On Thu, Feb 16, 2012 at 6:10 AM, Corey Dean <n3fe@repeater.net> wrote:
I would be interested in this as well, so please keep me in the loop. I haven't done this yet but I am very interested.
Corey N3FE ________________________________________ From: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] On Behalf Of K&R Yoksh [yokshs@gmail.com] Sent: Wednesday, February 15, 2012 10:54 PM To: app_rpt Subject: [App_rpt-users] Icom 706 Remote Base
Hello,
I'm trying to get my Icom 706Mk2g to work as a remote base.. I'm not having any luck whatsoever.. I know that my hardware works 100%, but Asterisk cannot seem to talk to my radio.
FWIW, I'm running SimpleUSB. I'm not sure if that makes any difference or not.
I read somewhere that app_rpt uses decimal instead of hex (as Icom does) for the Ci-v address. So instead of civaddr=58 (58 is the default for a 706Mk2g) I was told to try civaddr=88.
Any suggestions?
Does anyone have a 706 working as a remote base that would be willing to post a snippet from their rpt.conf for me?
Thanks. 73
Kyle K0KN Olathe, KS
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-- This message was scanned and is believed to be clean. Click here to report this message as spam. http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=BC57E1FA8.A881B _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users