Yes! I did set up extensions.conf as well.
From iax.conf:
[k4ksa] username=steve type=friend context=myphone host=dynamic auth=md5 secret=xxxxxxxxx disallow=all allow=ulaw allow=g726aal2 allow=gsm codecpriority=host transfer=no ;callerid=K4KSA
From extensions.conf:
[myphone] ;Settings for Zoiper exten => 46031,1,answer() ;Change the node number on all these lines to your ow$ exten => 46031,n,Playback(rpt/node) exten => 46031,n,Playback(digits/4) ; change the playback digits to your node a$ exten => 46031,n,Playback(digits/1) exten => 46031,n,Playback(digits/7) exten => 46031,n,Playback(digits/6) exten => 46031,n,Playback(digits/4) exten => 46031,n,Playback(rpt/connected) exten => 46031,n,rpt(46031|Pv) ; Change both numbers here to your node Also any idea why I can’t connect from the allstarlink telephone portal? Steve From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bob Pyke Sent: Friday, June 02, 2017 10:47 AM To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] First Time Install with some issues.. Item 1, does not concern me. with respect to 2 & 3, how did you setup extensions.conf? Did you set it up for zoiper? Thanks, Bob k6ecm 73 Sent from iPad On Jun 1, 2017, at 6:55 PM, Steve Siesel <steve@siesel.net <mailto:steve@siesel.net> > wrote: All, Here is what my problems are: 1. Getting the following in my asterisk trace: [Jun 1 21:33:22] WARNING[587] chan_iax2.c: REGISTER-LOG: registry rereqquest [Jun 1 21:34:12] WARNING[588] chan_iax2.c: REGISTER-LOG: Sending registration request for '46031' [Jun 1 21:34:12] WARNING[580] chan_iax2.c: REGISTER-LOG: registry rereqquest However my iax2 show registry shows: DMRLink*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 Y 46031 47.203.114.127:1025 60 Registered 2. I have port forwarded both udp and tcp 4569 to the Allstar node. I have also added the following to iax.conf for Zopier access: [k4ksa] username=steve type=friend context=myphone host=dynamic auth=md5 secret=xxxxxxx disallow=all allow=ulaw allow=g726aal2 allow=gsm codecpriority=host transfer=no ;callerid=K4KSA I have also added the context to extensions.conf as well. This is what I am getting in the asterisk trace when trying to register (also getting error 29 from Zopier) [Jun 1 21:35:35] NOTICE[585] chan_iax2.c: No registration for peer 'steve' (from 47.203.114.127) [Jun 1 21:35:37] NOTICE[582] chan_iax2.c: No registration for peer 'steve' (from 47.203.114.127) [Jun 1 21:35:40] NOTICE[585] chan_iax2.c: No registration for peer 'steve' (from 47.203.114.127) 3. Telephone access from Allstar. When using the dial in telephone number trying to get voice or function access it times out with a busy signal. I did a tcpdump port 4569 and I can see the telephone service making It to the machine: 21:43:29.564494 IP seal.lambdatel.com.iax > DMRLink.home.iax: UDP, length 96 21:43:29.565075 IP DMRLink.home.iax > seal.lambdatel.com.iax: UDP, length 65 Using RAT RC1 Anyone have any thoughts to my three problems? Steve K4KSA _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.