Thanks Jim the frog command is great :) Neal Sent from my iPhone On Aug 21, 2011, at 2:32 PM, Jim Duuuude <telesistant@hotmail.com> wrote:
chan_beagle follows the so-far consistent device specification methodology (Asterisk CLI command) of <device-type> active <device-name>
for chan_beagle, and your chan_beagle device named 'beagle1234' it would be:
beagle active beagle1234
for chan_simpleusb, and your chan_simpleusb device named 'fred42' it would be:
susb active fred42
for chan_usbradio, and your chan_usbradio device name 'usb5678' it would be:
radio active usb5678
[since chan_usbradio did this first, I think you can see the reasoning by which the particular syntax was chosen :-) ]
Also, you can do <device-type> active (with no device specified) to see which is currently "active" (selected).
JIM WB6NIL
From: njgarbenis@gmail.com Date: Sun, 21 Aug 2011 14:27:21 -0400 To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Beagleboard/Lox
I have a beagle board setup with the Lox board using both ports. When I use beagle tune to adjust audio it only works with port a. How change this to adjust port/node b
Neal
Sent from my iPhone _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users