Dear Bob, Ken, and Brayn Thank you very much. Unfortunately, I was aware the Allstar Standard Commands (http://ohnosec.org/drupal/node/21). Your help resolves the issue. Thanks again. -- Best Regards. Matteo. ________________________________ From: Zstart Zstar <zstart22@yahoo.com> To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Sent: Thursday, October 27, 2011 11:30 AM Subject: [App_rpt-users] Radio to Radio communication Dear All, I am newbie to app_rpt. I have a basic question, I have searched about it, but I could not find an appropriate solution. I have two radios which works in different frequency bands. Both are connected to Asterisk using URI. Reverse Autopatch is working fine from PSTN to the both radios. I want to establish a call between the radios. My question is that "is is possible to configure app_rpt to act as a bidirectional bridge between two radios?", i.e., when radio 1 activates PTT, its TX audio is transferred to radio 2 and vice versa. Any recommendation/answer would be appreciated. Thanks in advance. -- Best Regards. Matteo. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users