My personal opinion is the following.... If you are not having any issues, no concern. Any rule of thumb has many dependents. Hardware speed, available memory for intermittent use, how many other things that could potentially run soaking up cpu cycles. If your going to look at memory headroom, you need to test that with max usage. But don't forget to test cpu usage. If you don't have enough clock ticks to process that audio and other stuff, it will fail in some way. The short is that I don't worry about much till it presents itself as a problem. I plan for enough cpu and memory because I do a lot with my node. (2.1ghz intel atom w/4gb) Since we all seem to use different hardware, hard to have rules like that unless you refer only to BBB or RPi2 which have the same cpu/memory. ...mike/kb8jnm
So I've been on my never ending quest of learning linux. So I was reading about simpleusb and usbradio...please no debates versus quality!
I came across a reference to the top command and if asterisk takes up more than 20% or more I should consider simpleusb.
Well one of my sites running two nodes which is having audio issues! Is swinging from 20-40% never dipping below 20%
Thanks
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.