I just used the astupd.sh script to update my node 2250. All worked OK but had to reboot the node after the update. All seems fine now :-) app_rpt version 0.203 Matt G4RKY 2009/9/20 Bob Brown - WØNQX <bbrown@byrg.net>
BTW i just updated node 2181 using the update script
i went from 0.174 to 0.203
remotely via ssh, seamed to go fine i guess time will tell.
seems i am always behind. hihi!
the new rebuilt 2180 node was a raw install from the latest DL iso. -- Thanks in Advance
Bob Brown, WØNQX
Kansas City Metro Area
"Surely you can't be serious?" "Of course I am, and don't call me Shirley."
Jonathan Swift<http://www.brainyquote.com/quotes/authors/j/jonathan_swift.html> - "May you live every day of your life."
On Thu, Sep 17, 2009 at 00:00, Stephen Rodgers < hwstar@rodgers.sdcoxmail.com> wrote:
ACID 0.9 can be downloaded from dl.allstarlink.org.
This is based on Centos 5.3,
ACID version 0.9 contains:
app_rpt.c version 0.203:
1. Added tone burst detection for our European friends. 2. Fixed W9SH's audio format mismatch on startup bug (very unusual config) 3. Added check for RPT_A version of zaptel.(We need this to fix autopatch call progress issues) 4. Fixed strange keying problem with new version of IAXRPT. 5. Fixed more hang problems and unreliability with simplex repeater/remote base nodes 6. Fixed telemetry propagation when downrev (non-newkey1) systems present 7. Fixed irlp/echolink tx audio distortion at high gains 8. Resolve spurious time out message. 9. Fixed problems with simplex autopatch. 10. Fixed serial rx hang problem with Kenwood remotes 11. Fixed problem with serial baud rate being wiped out on Kenwood TMG-707 radios (using USB device). 12. Added delay statements to FT-897 serial commands on remote base bacause some FT897 radios do not accept the complete sequence of commands without some delay between the commands. 13. Fixed Mantis bug 0000032: ID Talkover CW loops causes RX audio to chop 14. Add beaconing node stanza key to allow the repeater ID to be sent regardless of whether there has vin activity or not. 15. Fix "always enabled" bug with holdofftelem feature. 16. Add nounkeyct and holdofftelem node stanza confiiguration options. 17. Add COP functions 49 (NOICE) and 50 (NOICD) to enable and disable all Allstar, Echolink and IRLP connections. 18. Fixed telemetry control parameters. 19. Resolve mantis bug 0000016: Quick unkeys and rekeys over the network queue a link Courtesy Tone 20.Add nolocallinkct key to node stanza so that nodes co-hosted on the same server can optionally send no link courtesy tone. 21. Added arbitary tone generation as COP function 48. 22.Add link activity timer function to resolve Mantis feature request 0000010. 23. Better control of IRLP connect and disconnect messages through config file options and DTMF commands, and added irlpplay CLI command to assist in queuing the messages one at a time. 24. Fixed Mantis bug 0000011 pad test broken 25. Fixed Mantis bug 0000004 out-of-band telemetry sent when link in monitor 26.Added antenna select for FT-950 27. Cleaned up debug messages for FT-950 28, Added FT-950 support 29. Fix alarm setup with multiple uChameleons
chan_irlp.c version 0.27:
1, Fixed problem with enabling and disabling irlp connect/disconnect announcement mmessages. Use irlpplay Asterisk cli command. 2, Don't update DB when operating in experimental reflector mode. 3. Resolve Mantis bug 0000001 by disabling Asterisk's DTMF decoder on IRLP incoming audio. 4. Major changes to add experimental reflector support and ability to connect to expermental reflectors.
chan_echolink.c version 0.21:
1, Resolved Mantis Bugs 0000026 and 0000038 2, Failure to connect to certain Echolink nodes. 3, Removed multiple initial packets.
chan_usbradio.c/xpmr has been updated:
1, CM108AH (new uri) support 2, Add support for CM119 sound chips 3, Improve carrier squelch operation. 4. Allow for hot plug functionallity of USB devices 5. Add rxontime parameter for simplex nodes. (anti-pingpong) 6. Fix TX hang problem. 7. Resolve Segfault when txmixa=voice and txtone is set to zero. 8. Sync with Xelatec version. Add TX blanking time. 9. Fixed mode steering problem and clipping in xpmr
Final Note: Someone needs to test the astupd feature on older ACID installs and either say it works or doesn't work. Do not use astupd on older installs until we have confirmation that it is working, play it safe and do a complete install from CD unless this is reported to be working from several sources.
Steve WA6ZFT _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users