Has anyone made any notes or videos on how to install and configure both ends of OpenVPN, or is it "so easy, even an idiot can do it"? N5ZUA On 8/5/2016 1:23 PM, Stephen - K1LNX wrote:
OpenVPN, running in UDP-tunnel mode, is typically my VPN solution of choice for AllStar and it works great...
ditto... I use it for a variety of things, and we use it exclusively on our DMR network with Ubiquiti routers, works like a champ.
73 Stephen K1LNX
On Fri, Aug 5, 2016 at 1:17 PM, David McGough <kb4fxc@inttek.net <mailto:kb4fxc@inttek.net>> wrote:
Tom,
OpenVPN, running in UDP-tunnel mode, is typically my VPN solution of choice for AllStar and it works great...
73, David KB4FXC
On Fri, 5 Aug 2016, Tom Hayward wrote:
> I'd like to hear what solutions people have come up with for placing a > node behind NAT where port forwarding is not available, such as a > cellular CGN, public wifi hotspot, public agency's network controlled > by an IT department, etc. My experience with this is mostly using > RTCMs which work fine behind NAT and can connect out to my Asterisk > instance running in a datacenter. I am trying to substitute a URI and > RPi in this scenario. > > Assuming this is a permanent, private link, I think these options are available: > - Set the RPi to connect to the hub on startup. If initiating the > connecting from inside the NAT, I think it will allow traffic to flow > both ways? > - Install an OpenVPN server on the hub and OpenVPN client on the RPi. > Tunnel Asterisk traffic over OpenVPN. > - Reverse SSH tunnel. Set the hub to connect to the node on 127.0.0.2 > or whatever I bind the tunnel to. > > Has anyone tried any of these options? How did it perform? What other > options do I have? What am I missing? > > Tom KD7LXL > _______________________________________________ > App_rpt-users mailing list > App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> > > To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" > You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. >
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.