Greg: Don't know about a page, but this works for me. Must be usbradio.con (vice simpleusb I think). ; ; CTCSS / PL TONES ; txctcssdefault= 103.5 ; default tx ctcss freq, any frequency permitted rxctcssfreqs= 67.0,88.5,136.5,192.8,250.3 ; rx ctcss freqs in floating point. must be in table ; the Nth position in rxctcssfreqs sends Nth position of txctcssfreqs txctcssfreqs= 67.0,88.5,103.5,192.8,250.3 ; tx ctcss freqs, any frequency permitted Each listed PL gives the same PL out (like a community repeater) EXCEPT 136.5 RX gives 103.5 TX. [This exception is all about a multi-receiver/crossband system, see http://KF5VH.com for more details about the repeater.] The default PL is used when the RX is inactive and an announcement or net audio uses the TX. ...STeve - KF5VH On 8/15/2018 7:42 AM, Greg wrote:
Is there a page with information of how to use allstar to decode and encode ctcss? I was hoping to do 2 different tones. Thanks Greg _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus