Eric, I was just using ham radio deluxe to test my radio and cable. I am using a CAT cable i purchased off ebay. http://www.ebay.com/itm/USB-Programming-cable-Yaesu-FT-857-FT-817-CT-62-FT-897-/140899886444?pt=US_Ham_Radio_Transceivers&hash=item20ce49a56c Mike On Mon, Jan 14, 2013 at 3:40 AM, Eric Guth <eric@efratnetworks.com> wrote:
Michael, ****
** **
Are you using Ham radio deluxe to control and interface to the radio using the URI? I am looking for a way to control all of my ham station using some interface like the URI to consolidate my microphone, DTMF, Key, and speaker into one unit. ****
** **
73, ****
** **
Eric ****
4Z5UG / WA6IGR****
Allstar Node: 28422****
4Z5UG@guth.us****
Israel Direct: 077-950-9451 USA Direct: +1-720-377-3840****
** **
** **
** **
*From:* app_rpt-users-bounces@ohnosec.org [mailto: app_rpt-users-bounces@ohnosec.org] *On Behalf Of *Michael Hebert *Sent:* Monday, January 14, 2013 3:57 AM *To:* app_rpt-users@ohnosec.org *Subject:* [App_rpt-users] Remote base help****
** **
Group,****
** **
Can someone please help me out either on or off list? I have 2 nodes hooked up to my ACID box using URIx. One is an allstar public node that is hooked up to a UHF repeater. The other is a private node remote base hooked up to a FT-817ND. Audio is working great on both radios. I am able to connect and disconnect with no problems between the nodes. So, to get to the point, I am not able to remote command the remote base either from DTMF via the repeater or CLI. I have tried both a serial and USB CAT cable from the ACID box. I am able to control the FT817ND with no problems using ham radio deluxe, so I know both cables and the radio are working. I did hook up a null modem cable from the port in rpt.conf to my laptop and I am seeing something in putty. I have tried the 3 port speeds that the radio supports for CAT. The data I am seeing using putty is unreadable for all 3 speeds. I do not know what to do next****
** **
Any thoughts??****
** **
Thanks,****
** **
Mike – KD5DFB****
** **