Doug Bade wrote:
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
If all the nodes are on the same PC then no other forwarding statements are required in the firewall/router. The one statement for 4569/udp will serve them all.
You will need to add register statements for each node in iax.conf, and optionally statpost statements in rpt.conf.
Steve WA6ZFT
Excellent... I will be working on this over the weekend.... I appreciate the info...It will be the same computer, just other nodes running from it.. Thanks for the quick help! Doug KD8B
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
Well all is now well. It was a firewall issue. I am using Untangle Firewall /Router and it utilizes a VM for the firewall subsystem which allows for 2 filtering options. One is a complete bypass at the network interface level ( this is what is working now and a true port forward) the other is a rule set through the Firewall with Iptables and a gui to configure it. I was not able to get the firewall ruleset working so the bypass method works.. The bypass makes it faster but the audits in the GUI never see it if it is not a ruleset. Hopefully this may help others if it comes up :-) I may work on the ruleset as I would love to control and monitor bandwidth and such which the gui does... in the long run I would prefer it.. but were up!!!!!! Doug KD8B