Thank you I have a node running now , I have run out out of ports on my controller , so instead of buying a new controller I would try via allstar The node is on a static IP on my network and a static IP via my ISP My idea is to get the 220 repeater up and running with allstar as the controller , Or would it just be easier to build with a node / controller ? Right now , I have a node with Echolink , planning on a remote base (link to other repeaters as needed in the area or simplex) Then to add the 220 repeater Thanks Richard Szajkowski
On Nov 10, 2013, at 6:46 PM, "Bryan D. Boyle" <bdboyle@bdboyle.com> wrote:
Use a node number under 2000.
like 1999
Turn off the registration statements in rpt.conf
Set up the radio context to point to 127.0.0.1 as the resolving address (if you're not on a lan with an address via dhcp or as a fixed address)
On 11/10/2013 6:12 PM, Richard Szajkowski wrote: Hello to the group
I am rebuilding my 220 repeater , can I use the uri and allstar as a stand alone repeater controller ?
I don't want any links at this time to the 220 repeater , maybe down the road I will link the VHF to the 220
So do I need a node number ?
I have read about the remote base , and how to do that
Thanks
Richard Szajkowski
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users