K0HYT, Under rpt.conf you should have the node outlined like this. This is for a TM-271a. But the basic is the same. [xxxx] rxchannel = Zap/2 ; Rx audio/signalling channel remote = tm271 ; Enable to support Kenwood TMG-707 ioport=/dev/ttyUSB0 functions = remote-functions ; Remote function list statpost_program=/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Sat, Dec 29, 2018 at 7:46 AM Bob Pyke <k6ecm1@gmail.com> wrote:
You are using hamvoip, and this list is for AllstarLink. There are some folks who monitor both lists, but you are more apt to receive a useful response from the other list.
Thanks, Bob K6ECM 73
On Dec 29, 2018, at 6:55 AM, m@palmers-family.com wrote:
Hello everyone. After a couple years of playing with AllStar on RPI I have finally dove into my remote base setup. I am using a Pi3 with a IC706MKIIG, Prolific USB adapter (known working). When I add the radio=ic706 line and restart Asterisk I notice the heartbeat led locks solid and asterisk crashes when I connect to 1999. If I comment out that one line it works fine. I have set permissions to /dev/USB0. Any ideas? I have attached a PDF with my screenshots and node stanza.
Thanks in advance for any help.
Rpi 3 Arch
IC706MkIIG
Hamvoip V 1.4rc5-14
Asterisk 1.3.23.pre.hamvoip-CV1.5.3-48-app_rpt-0.327-11
<Rbase Config.pdf>
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.