jum and i wrote an nprm to establish a single freq on non interference basis, League lobbied against it, fcc shot it down simple answer. -- Bryan Sent from my iPhone 5...No electrons were harmed in the sending of this message.
On Feb 10, 2015, at 09:37, Tim Sawyer <tim.sawyer@mac.com> wrote:
You pretty much have it right. There are a couple of ranger nodes on the nodes list. I think there was some effort to create a national Ranger simplex channel. LiTZ on that channel would trigger an alarm to notify those monitoring of an emergency. I don’t know what happened to the project.
On Feb 9, 2015, at 9:34 PM, Bryan Fields <Bryan@bryanfields.net> wrote:
On 2/9/15, 1:39 AM, Bryan Fields wrote:
I've looked at the logs and run it in debug too. No obvious errors (or any for that matter).
Guess I could run it under GDB next....
I read the source to app_rpt.c and found that nodes starting with a 9 are called a ranger node. No idea what this is. Can anyone elaborate?
#define ISRANGER(name) (name[0] == '9')
/* if has a RANGER node connected to it, use special telemetry for RANGER mode */ if (haslink) { res = telem_lookup(myrpt,mychannel, myrpt->name, "ranger"); if(res) ast_log(LOG_WARNING, "telem_lookup:ranger failed on %s\n", mychannel->name); }
looks like a ranger node is suppose to listen for a LiTZ and then connect to another node. When others are using that other node as along as the ranger node is connected to it it will send the "ranger" CT which is what I'm hearing.
{"ranger","|t(1800,0,60,3072)(0,0,50,0)(1800,0,60,3072)(0,0,50,0)(1800,0,60,3072)(0,0,50,0)(1800,0,60,3072)(0,0,50,0)(1800,0,60,3072)(0,0,50,0)(1800,0,60,3072)(0,0,150,0)"}
Good news is my 1800 hz decode from audacity was correct!
So I'm guessing this is meant to be some kinda half duplex node that links in for emergency use. Anyone have any idea on this? I can't find anything on the docs site about ranger nodes.
If I make the node in the 1902 the problem goes away, or I could define the "ranger" CT to be nothing.
73's -- Bryan Fields
727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.