Dave, Enable echolink in /etc/asterisk/modules error is in iax.conf I dont have a downloaded config handy. look for a line that has /0.0.0.0 Sorry I can't be more specific. If you post your iax.conf I can tell you what it is. 73, Steve N4IRS On 11/01/2015 01:54 PM, Dave Newmyer wrote:
I'm seeing the following line occurring:
WARNING[675] acl.c: is not a valid IP
Any suggestions as to where I should look to resolve this?
On a side note, since moving from ACID to DIAL, I am not seeing my Echolink node being active on the echolink.org site.
Have set the system.conf file echolinkenable=1
echolink.conf file seems to be OK.
73,
Dave N
N0KM
--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic