I do not appear to have any of the DIAL source on my DIAL repeater - so how would I fetch the entire tree? I tried cloning AllStarLink without success. Thanks! Steven Donegan KK6IVC General Class FCC License FAA PP-ASEL Pilots License Silver State Car #86 www.sscc.us On Sunday, February 12, 2017 1:43 PM, Steve Zingman <szingman@msgstor.com> wrote: Well, I'm back after 3 days at the Orlando Hamfest. I had a great time meeting with quite a few ASL users that found me out in the flea market. ( have no idea how) I also had a chance to meet with a couple of hardware vendors about going forward with ASL. More on this later. Thanks to all. We have found the bug in uridiag that fails a known good URI with the loopback connector. In short, uridiag was not properly setting the audio output level. This does not in anyway affect the operation of either USB channel driver during normal asterisk operation. As with all ASL software, the source is published on GitHub at <https://github.com/AllStarLink> in the uridiag repository. For those that want to fix uridiag on their existing installations: login as root cd /usr/src/astsrc-1.4.23-pre/ rm -rf uridiag git clone https://github.com/AllStarLink/uridiag.git cd uridiag make cp uridiag /usr/local/bin You can now run the new uridiag. Make sure asterisk is NOT running. connect the loopback connector run uridiag 73, Steve N4IRS -- --- "Real programmers use vi, that's why I use nano." _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.