You might find that http://dl.allstarlink.org/installcd/phase2.sh does almost EXACTLY what you are looking for. Id get rid of the stuff from echo "Getting setup scripts..." and beyond because the filesystem format may be different on your OS or OS version (it installs stuff into files/directories specific to Centos/Fedora). When I have a second or two, which wont be for a while unfortunately, I was going to post a copy of the script edited exactly in that manner (or maybe a change to the existing one with an optional command argument that exits at that point).
Date: Mon, 28 Jul 2008 06:53:53 +1000 To: app_rpt@lists.illiana.net From: vk3jed@vkradio.com Subject: Re: [App_rpt] Asterisk segfaults after installation
At 01:03 AM 7/28/2008, you wrote:
I hear you about not wanting to re-install a whole system from scratch.
That's because the system is used for other purposes.
A possible solution for your problem is to use a set of source files which is known to work together very well. Why not try downloading the files.tar.gz source file tarball from http://dl.allstarlink.org/installcd and unpack it in /usr/src? After unpacking, run ./configure, make and make install in the zaptel, libpri, and asterisk directories.
I was originally looking for a package that would install Asterisk and some suitable sample configs on an existing system, sort of like ACID or EVB without the base Linux system, but in any case, I'm open to this route. I did use the current Asterisk, Zaptel and libpri from the Asterisk site for my system.
Will consider it as a good option to try in any case.
73 de VK3JED http://vkradio.com
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt