I use a crontab task to do this - the task is: /usr/local/bin/lsnodes 40920 >/root/nodelist 2>&1 nodecount=`wc -l </root/nodelist` export nodecount echocount=`grep ECHOLINK </root/nodelist|wc -l` export echocount echo "Asterisk is connected to "$nodecount" nodes, $echocount are ECHOLINK." [ "$nodecount" -lt 20 ] && sh /root/restart.sh And restart.sh contains: restarttime=`date` echo "Asterisk restart at "$restarttime >>/root/restart.log asterisk -rx 'restart now' Works dandy, any time my nodelist gets less than normal it restarts... Steven Donegan KK6IVC General Class FCC License FAA PP-ASEL Pilots License Silver State Car #86 www.sscc.us From: Bob <k6ecm1@gmail.com> To: App_rpt-users@lists.allstarlink.org Sent: Saturday, February 25, 2017 7:41 PM Subject: [App_rpt-users] Auto Reconnect? Is there a way to setup an auto reconnect after an internet interruption? I would want to set it for a specific period of time, which I could perform manually, but I don't want to have to monitor the repeater to catch the disconnect. Thoughts? Thanks, Bob k6ecm _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.