In rpt.conf I think you want to set duplex=0 if you are using half duplex;duplex = 2 ; (Optional) set duplex operating mode ;; 0 = half duplex (telemetry and courtesy tones do not transmit) ;; 1 = semi-half duplex (telemetry and courtesy tones transmit, but not ;; repeated audio ;; 2 = normal full-duplex mode (Default) ;; 3 = full-duplex mode, without repeated audio from main input source ;; 4 - Normal except no main repeat audio during autopatch onlyotherwise look at - http://209.159.155.200/drupal/node/96 73 Doug WA3DSP http://www.crompton.com/hamradio
Date: Wed, 6 Nov 2013 01:37:43 +0200 From: shaun@pmbnet.co.za To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Repeater Tail on URIx
How can I eliminate the courtesy tone/repeater tail/hangtime?
I am not sure what it is called, but it is the transmission that comes back to you after you have keyed up. Some people use this to see if they are "hitting" the repeater.
My problem is that I am setting up an AllStar Cross-band repeater linked to a distant repeater in another city. The repeater tails of the two sites, are chasing each other and the link cannot drop out.
I have tried changing the hangtime=300 althangtime=100 to hangtime=003 althangtime=001 but it did not reduce or eliminate the tail. This was in the rpt.conf file.
Shaun zr5s
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users