Lu, I think I run the default port on just one node. The rest of mine use 4560-4567 and 4570 and up. The repeater sites do not have an issue nor does my ISP at home, but I have ran into the issue in other places as well... Corey N3FE ________________________________________ From: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] On Behalf Of Lu Vencl [vencl@att.net] Sent: Monday, December 30, 2013 11:10 PM To: 'Christopher Kovacs'; 'app_rpt-users' Subject: Re: [App_rpt-users] iax2 registry issue All, I have been having issues off and one for months and I swear that if I reboot my router a few times to get a new IP, the problem clears. This time I decided to try something differnet to see if the ISP might be playing games or might be having issues with 4569. I changed my UDP port 4569 to 14569 and bingo it registered immediately. So if you might want to try that. There is something going on at least with my ISP I use in Colorado (Century Link) and I think this might be the fix. Just passing along if you are also having issues. Remember, you will need to change your port on the allstarlink portal and a couple of conf files. Anything with 4569 is what I changed to 14569 Lu, KA4EPS From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Christopher Kovacs Sent: Saturday, December 28, 2013 6:06 PM To: app_rpt-users Subject: [App_rpt-users] iax2 registry issue Hi All, I am running Xipar release of asterisk and am new to asterisk. I have been having issues with iax2 registration. I can not figure out how to re-register the node. The only thing that works is a reboot. CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569<http://67.215.233.178:4569> N 29062 <Unregistered> 60 Timeout 67.215.233.178:4569<http://67.215.233.178:4569> N 29061 <Unregistered> 60 Request Sent CLI> iax2 show stats IAX Statistics --------------------- Outstanding frames: 2 (0 ingress, 2 egress) Packets in transmit queue: 0 dead, 0 final, 2 total I can not connect to any other nodes until re-registered and get a "connection failed". Thanks in advance, Chris, w0anm