Jim, Might just be me but I'm having hard time understanding your setup. Any chance you could provide a drawing or more detailed explanation of what you're trying to do? On Fri, Nov 23, 2018 at 1:42 PM Jim Aspinwall No1PC <no1pc@yahoo.com> wrote:
I thought I was going to be ingenious and replace a few RLC multi-port controllers that each have one of the link ports tied to an AllStar node that runs in non-duplex, and the node connects to another AllStar hub (running in duplex) that is used as the 'link' to feed other repeaters in similar configuration.
Simply connect the repeater radio to the AllStar interface, re-configure the node to duplex=2 - tah-dah - repeater!!
Then, connect the repeater node to the hub so it can be linked to the other sites. Connects as before, not unexpected. Great.
What I did not account for is that the hub is running in duplex, so whatever the repeater sends to it comes back, delayed of course. Sounds like an undesired configuration...
However that doesn't seem to account for the fact in the prior configuration the duplex hub traffic never came back into the half-duplex node and echo'd.
Is this a hang-time thing? Am I missing something? Expected behavior - don't try this at home?
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.