Hi Michael, Thanks for the information to test the URI. It does not seem the URI is the issue. I have swapped the URIs with new ones and they all did the same thing. I believe this issue is with the PC hardware or software. Might be a USB bus problem. I will look further into it. boB - W5EVH On Fri, Feb 7, 2014 at 7:45 PM, Michael Hebert <mhebert1975@gmail.com>wrote:
You can try the uridiag program.
Q: How can I test my URI? A: Download the uridiag program located at
http://svn.ohnosec.org/viewvc/projects/allstar/uridiag/trunk/?root=svn&view=...
Un-tar it and then 'make' it. Run ./uridiag and select option C. That will tell you how to make a loop-back connector for running the diagnostics. This is the same program we use to test each URI before it leaves the factory.
Q: How can I make a loop-back cable to test my URI? A: Get a male DB-25 connector such as L717SDB25P from www.digikey.com . Then wire up the following connections: Pin 1 to Pin 7 Pin 2 to Pin 3 Pin 4 to Pin 8 Pin 23 to Pin 24 10K Resistor between Pins 21 and 22 10K Resistor between Pins 21 and 23 For URIx (CM119) only, also include the following connections: Pin 5 to Pin 10 Pin 6 to Pin 11
On Fri, Feb 7, 2014 at 3:22 PM, Bob Roszkowski <bob@w5evh.org> wrote:
Group,
I have a site that is acting strange. I have a server with a VHF(Mastr II) and UHF(TKR-850) repeater, each with a URI. Both repeaters are linked together locally. I noticed while someone is using the machine, the TX will just stop while they are talking. If I switch to the other repeater, the TX is working fine. The URIs Red LED goes out. This happens to both machines. I have swapped and changed URIs and cables with no change. Any ideas?
boB - W5EVH
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.