I've got two nodes: 2586 and 27036 Both sit on the same LAN. Is it possible to connect one to the other (link) them over the LAN while they are still reachable from the Internet via ALLSTAR public node list You can see my attempt below that is failing across the LAN. I don't know if it is failing because the same node number is also in the public IP/ public nodelist. Is there a way to 'locally' override the public node list so it's number is reachable 'locally' via lan or VPN? Or do local type nodes need to not also register with ALLSTAR LINK? In this example I'm trying to make outbound link to node 2586 which is at 10.73.73.9 internally.. Back on node 27036 in it's config I of course am pointing back to 2586 at it's internal IP (not shown here). Thanks! -Steve 27036 = radio@127.0.0.1/27036,NONE ; This must be changed to your node number 2586 = radio@10.73.73.9/2586,NONE Michigan Broadband Systems Inc. "Always Connected" (734)527-7150 Steve's cellphone: (734)904-1811 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.