Part 1 of the answer: If you are running this as a standard node, you need to specify an empty function table stanza so that nothing gets decoded. If you are running as a remote base node, then no DTMF functions will be decoded fromt he radio interface. Remote base nodes have .y on the end of them in the node table. This is how app_rpt knows which type of code to run. Part 2 of the answer: chan_usbradio causes DTMF digits to be printed on the console. As far as I know, there's no way to disable this without modifying the channel driver itself, but maybe Steve Henke knows something I don't.
From: David McGough <kb4fxc@inttek.net> Date: 2008/07/25 Fri AM 10:18:46 PDT To: Asterisk Repeater Controler <app_rpt@lists.illiana.net> Subject: [App_rpt] General config questions....try #2
Hi Everyone,
Since I haven't heard any feedback about this post, I guess the answer is "no" to these questions??? ....If so, I think I'll have a go at resolving them.
Thanks!
David KB4FXC
Original message:
Now that I'm to the "beta" test phase, I've got some more questions that I don't see answers to on the list--or have overlooked (if so, oops!).
First, is there an easy way to disable DTMF decoding entirely for a channel? My HF node (on very staticy 75M) generates a fair number of spurious DTMF decodes. And, each time it thinks it hears a code, there is, as expected, a very short dropout of HF RX audio being passed to the UHF repeater side. I don't need DTMF decode at all for this node and would like to turn it off.
Second, does anyone have (or know of) a simple utility to generate sound files for the CD ID, etc.
Thanks!
David KB4FXC
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt