I had a lot of fun with this a while back Can I assume you have more than one box on your system? And perhaps you have played with the jitterbuffer settings I IAX config? In my case, there was some problem on my network or some unwanted behavior of my router and a delay of up to resyncthreshold= would accumulate during quiet periods. If I had this set to 2000, for example, and came on the air as it reached 1990, then I could hear nearly two seconds of audio being played back at me.
From the CLI type:
iax2 show channels This will show where the delay is building up. I found that I had to have my private nodes periodically "pinging" something through the router; and for good measure I put the local IP addresses of all the common system nodes (even the registering ones) in the config files. I set resyncthreshold=300 so that even if there is a problem, any delay is hardly noticeable. 73 Ken
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users- bounces@ohnosec.org] On Behalf Of Tim Sawyer Sent: Monday, October 24, 2011 10:08 AM To: app_rpt list Subject: [App_rpt-users] Variable Repeat Audio Delay
App_rpt has an indeterminate repeat audio delay on our system. Sometimes we hear ourselves when we unkey other times not. The amount of delay varies from near zero to four or five words. Has anybody else experienced this on their system? -- Tim :wq
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users