Hello friends, You can also consider the price of a Digium TDM2460B (24 FXS channels) or TDM2460E (same with hardware echocan) or with minus quad FXS modules (scalable from 4 to 24 channels by 4 lines step) against a T1+channel bank. It's how I do here without any issue. Or wait a little for the new Digium TDM which must replace the "old" TDM400P serie. It will accept 4 old one line only modules (for TDM400P) or 2 new "quad" modules (for TDM2400P) + an optional echocan module derivated from the TDM2400P but with minus chips due to the module number reduction. 73, F6HQZ, Francois BERGERET. -----Message d'origine----- De : app_rpt-bounces@lists.illiana.net [mailto:app_rpt-bounces@lists.illiana.net] De la part de Jon Teh Envoyé : mercredi 28 juin 2006 04:14 À : Asterisk Repeater Controler Cc : Jon Teh Objet : Re: [App_rpt] Interface questions ...SNIP...
As long as the FXS device is seen as a Zaptel device in Asterisk, it will work with app_rpt. In our systems, we use ARIB cards with Digium TE110p/T100p
T1
cards and a channel bank. It doesn't matter which driver is required as long is it is a Zaptel driver.
Ah okay, that clears it up a little. I was planning on saving up for quad radio card, especially for its DCS and CTCSS capabilities. However, I have been offered a T1 card and channel bank for an unrefusable price, so I'm probably going that way. Regards, Jon _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt