Just did a clean install of ACID on a Compaq DL380 server This is a Box with Dual Pentium 733's and no built on USB. Also to make this more fun I'm using a USB PCI card to get USB support. The card has an NEC chipset and I can provide more details as wanted. It reliably does not work on bootup. What I mean by that the USB FOB is not producing any audio on it's output.. It has the normal flashing light on the fob and the software behaves like usual when sending audio (no errors) or anything on screen that looks out of ordinary.. Now if I manually do an: rpt restart and then radio key and radio unkey a few times it startes to work and then works just fine after that.. If I restart asterisk or the entire box the problem comes back. Has anyone else ever experienced this or soething like it? I will try another USB card and moving the card around to different interrups.. Just weird... and that it works after slapping it around with commands... Michigan Broadband Systems Inc. "Always Connected" (734)527-7150 Steve's cellphone: (734)904-1811 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.