Good Day, I am helping work on a machine that I setup with ACID about 7 years ago. The machine that ACID was running on died a few days ago, and we are trying to replace it with a new machine running DIAL. We got the machine setup without issue, however we are having issues getting DIAL to use the URI (note, this is a URI, not a URIx). We can get audio from Asterisk into the repeater, however we don't seem to get any audio or COR back from the repeater. The device was 100% working before the machine failed. As a test, we connected a URIx that we had for another project and that worked without issue. We're assuming there's a difference in the URI from the URIx (I know it's CM108 vs CM119) and the way Asterisk / App_rpt interacts with it. Anyone able to help with what we need to change to get this working? 73 and thanks, Matt, NM1B