The chan_pi driver first showed up in early 2016. From what I was told, Jim coded it to work with a prototype pi-hat board that was being developed by DMK engineering. This pi-hat hardware included an I2C attached GPIO chip similar to an MCP23017. There was no code to directly drive the native RPi GPIO. As for the audio device, based on the mixer-setting code, it appears to be the Cirrus/Wolfson WM5102 I2S audio chip or similar. I don't think this project ever made it beyond the early prototype phase (anyone know???). Back in that timeframe, there was major concern that the CM108/CM119 USB chips might be on the rapid path to extinction. Now, we know that genuine C-media CM119A and CM119B chips will continue to be readily available....And, I expect there will be CM1xyz clones available until the cows come home! 73, David KB4FXC On Mon, 15 Apr 2019, Skyler F wrote:
Would the CHAN_Pi support a GPIO -Based sound card? I would love to see support for a GPIO-Based Sound card, not USB.
It would be great to be able to add analog compatibility with all of these multimode digital hotspots, but they are GPIO based, and it would be awkward to wire a USB sound card.
On Sun, Apr 14, 2019 at 1:39 PM Marshall Oldham <ke6pcv@cal-net.org> wrote:
George,
I have not seen a reply to your question on the list.
So, I asked someone more knowledgeable.
It is a raspberry pi specific driver for gpio.
I believe it also does a few other things too.
Hope this helps.
Marshall - ke6pcv
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of George Csahanin Sent: Wednesday, April 10, 2019 10:37 PM To: app_rpt-users@lists.allstarlink.org Subject: [App_rpt-users] CHAN_PI
Hey guys, looking at the source I see chan_pi...what is it. I knew at one time but my aging grey matter can't find it.
Reply off list if desired
GeorgeC W2DB
Allstar nodes 2360, 2428, 28599, 49089
-- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5716 home 401-338-0568 cel
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.