On 1/28/2012 9:41 PM, K&R Yoksh wrote:
Hello,
I spent some time today modifying the fan control script TXFAN, and am happy to say that I've managed to get it working under app_rpt. I'm sure that there is a more elegant way to accomplish this in software, but as I mentioned before, I'm no programmer.
No...but the results are the same...:) In the best traditions of code hacking, Kyle...;) Works nice, once I remembered that I had to set gpio1=out0 in the usbradio.conf file so I could actually control the pin...:) Key the radio up...pin goes high after 10 sec...120 seconds after unkey...pin goes low. Nice. Have my 260 on the plug right now...and it goes up and down as the pin goes high and low... Now, to build the simple interface circuit on some perf, hook it up...and start turning my fans on and off...without having to keep them running all the time. Thanks for the links and birddogging this. (we really need a repository somewhere with people's scripts, etc to share the collective knowledge...and it shouldn't fall on Duuuude or the other folks..) Nice job, Kyle. Scripts are running on the morrisville nodes...and as soon as I can get to rat shack to pick up the bits and such...have no doubt that it will work fine... BB