On your fob do you have the left channel connected to your radio mic input? App_Rpt defaults to tx audio on the left channel on the speaker out on the sound device. Try connecting a set of amplified speakers to see if you are getting any audio out at all. Jon VA3RQ On 8/19/2010 3:42 PM, Corey Dean N3FE wrote:
Thanks for all that replied to my request for the old admin manual. I wanted to use it for general reading.
I am somewhat familiar with asterisk itself. I have been using it for about 4 years. The FOB is just new to me. Before I modded the USB FOB I decided I would try it out on the system. I get no audio at all. I know it is a CM108 chip on one of them. Trying to follow instructions I just am not able to hear any audio at all. I have even tried sending the rpt fun nodenum dtmfcommand (for the time) to send the time. I can see where it transmits on the screen. Shouldn't I be hearing something without modding the FOB?
Corey N3FE
-----Original Message----- From: Bob Brown - WØNQX [mailto:bbrown@byrg.net] Sent: Wednesday, August 18, 2010 9:23 AM To: Corey Dean N3FE Subject: Re: [App_rpt-users] acid-sysadmin
this is a bit dated but should get you what you need -- Thanks in Advance
Bob Brown, WØNQX
Kansas City Metro Area
Quis custodiet ipsos custodes?
--
On Wed, Aug 18, 2010 at 07:18, Corey Dean N3FE<n3fe@repeater.net> wrote:
Can someone email me a copy of the acid-sysadmin.pdf? The link doesn't work and I don't have a copy of it...
Corey N3FE
-- This message has been checked and is believed to be clean. _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
-- This message was scanned and is believed to be clean. Click here to report this message as spam. http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=4D9D52F5CC.A254B
-- This message was scanned and is believed to be clean.
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users